Polyurea


Australian made Tufflon and Elaston range of pure polyurea is available in several grades each suited to a particular application in mining, construction, civil, transport, waterproofing, tanking, water and waste-water industries. Derived from the original spray polyurea developed by Texaco in the 1980’s, there is no other polyurea range in the world with such a long and successful history of use. Designed for abrasion, impact, corrosion, chemical, waterproofing and permanent immersion there is a specific grade of Tufflon polyurea to suit each project. Used throughout Australia, New Zealand, the Pacific Islands, Europe, Taiwan and China this polyurea continues to perform year after year. The Tufflon range of spray-applied, pure polyurea elastomers is tough and permanently elastomeric, making them the perfect choice for protecting and sealing steel and concrete surfaces. A continuous and seamless thick-film lining is rapidly spray-applied with a vice-like grip to well-prepared surfaces and is touch dry within seconds. Unlike paint, epoxy or cementitious coatings, Tufflon remains flexible and stretchy for many years and will move and conform to subtle changes in the substrate without cracking, flaking or blistering. Partially soluble diluents such as Propylene Carbonate are not used in any of the Tufflon or Elaston range of polyurea products.

Resources

Video – Tufflon Application

Brochures

Tufflon and Elaston Brouchor

 admin@liquimix.com

PRODUCT FEATURES Hard

(Shore)

Elong

(%)

SDS

A

SDS

B

TDS

Tufflon- D60 Pure polyurea – High hardness, high adhesion for anti-corrosion on steel 60D 218
Tufflon- P90 Pure polyurea – Medium hardness, potable water grade and general purpose 90A 425
Tufflon-P90AS Pure polyurea – antistatic version of Tufflon-P90, for use in explosive and flammable environments
Tufflon- P80 Pure polyurea – Excellent all rounder with a long history of use. Use on Geofabric 80A 427
Tufflon- JF90 Pure polyurea – Joint filling structural polyurea 90A 430
Elaston – W80 Pure polyurea – Waterproofing grade. Low viscosity for easy processing 80A 440
Elaston – PL75 Polyurethane – Pipelining passes all requirements for BS EN 15655:2009 (approved for Internal Lining of pipelines) 75D >20
Hybron- W90 Hybrid polyurea – Medium hardness economical grade 90A 450

 

 

tanking_thumb

Tufflon-P90

cpi_38700_thumb

Tufflon-D60

cpi_38701_thumb

Tufflon – P80

cpi_40914_thumb

Elaston-W80

ElastoPave

Tufflon-JF90 Polyurea Joint Filler