Polyurethane Foam


Liquimix markets several grades of polyurethane foam each with a different target market. For all our polyurethane foams, best results are achieved when the two components are mixed using specialised plural-component equipment such as Graco E-10 or E-XP2. All our foams are made under ISO9001 in Melbourne, Australia.

PURL SP-32 PURL PIP-32 PURL GP-42 PURL GPW-42 PURL SJ-90 PURL SJ-64
MIX RATIO PARTS A AND B 1:1 1:1 1:1 1:1 1:1 1:1
PROCESSING TEMPERATURE (⁰C) 40-50  40-50  40-50  40-50  40-50  40-50
PROCESSING PRESSURE (PSI) 1,500  1,500  1,500  1,500  1,500  1,500
CREAM TIME (SEC) @ 21⁰C 4-7  22  45  42  68  18-22
GEL TIME (SEC) @ 21⁰C 10-14  115  190  170  260  46-50
RISE TIME (SEC) @ 21⁰C 28-36  228  360  320  510
FREE RISE DENSITY (KG/M³) @ 21⁰C 30-34  33  43  40  90  62-66
FIRE TEST – SELF EXTINGUISHING (SEC) 0-3  0-3  0-3  0-3  0-3  0-3
THERMAL CONDUCTIVITY (K-FACTOR) @ 22.5ºC 0.022 W/mK  0.023 W/mK  0.025 W/mK  0.030W/mK  <0.030 W/mK
R-VALUE (@ 48MM) 3.64 m²K/W
CLOSED CELL CONTENT >95%  >95%  >95%  >95%  >95%  >85%
VOC EMISSIONS 0.01 over 24 hrs  0.01 over 24 hrs
TDS TDS – PURL SP-32 TDS – PURL PIP-32 TDS – PURL GP-42 TDS – PURL GPW-42 TDS – PURL SJ-90 TDS – PURL SJ-64
IMG_4209NEW.tif.imagep

PURL SP-32

PURL PIP-32

IMG_5713.tif.imagep.39.0.830.600

PURL SPO-8

Man-Spraying-LD-C-50-2

PURL GP-42

IMG_0413.tif.imagep

PURL GPW-42

Polyurethane Foam Injection provides-no excavation repair for slab foundation

PURL SJ-90